New Schulte XH1500 Series 5 Upgrade 15& Cutter (Light kit, Walking Center Axles, 26" Laminate Tires) Ask your salesperson about stock on order with alternate options walking wing axles

New, Extra heavy duty 15 foot, rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3/4″ input shafts and 3” (75mm) output shaft, Extra heavy duty 275hp divider box
Extra heavy duty Bondioli Cat 6 (G8) cutter deck drive lines
New high-torque wing clutches ensure better performance in rough cutting
All grease points on the main mower body have been eliminated, spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free, fibre wound bushings with 1 1/4″ diameter pins for strength
Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck
Tandem walking axles result in smooth operation over rough surfaces
Increased ground clearance and a cutting chamber depth of 15 3/8” (2″ greater than the Series 4) and an increased blade tip speed, result in an unsurpassed material flow with improved cutting speed
Extra large 10.5 X 27 skid steer tires, allow for greater transport height along with improved performance in wet conditions (other options available)
The XH-1500 Series 5 incorporates a floating hitch through the use of tension links. These links are connected from the hitch to the rear beam and are allowed to free float in one direction. This system allows the front of the cutter to easily pass over obstacles without causing damages to the tension links or putting unnecessary stress on the deck
The hitch is also equipped with a bolt in, replaceable 2 1/4″ swivel which allows for maximum ground contouring without putting unnecessary twisting on the tractor draw bar
Hitch options include Schulte’s Precision Hitch, a standard clevis and our new Pro Level Hitch
Centre suspension reduces stress on tractor draw bar
3/8” thick formed deck protection rings prevent blade to deck contact
Double safety chains with individually replaceable links are standard equipment
New adjustable and replaceable side skirt with skid shoes that are cast and cupped to reduce scrubbing on tight turns
Optional gauge wheel kit can be mounted on the left or right wing to aid in clearing road approaches during ditch mowing
New wing lift tower, along with rugged hinge line allow for easier operation & increased strength. The double acting independent wing lift cylinder was designed to put less stress on wings and hinges
Phased hydraulic cylinders are standard to provide level lifting across the width of the cutter. Centre and wing sections all raise and lower together. Cutting height is controlled by the centre depth stop for one touch leveling.
Cutting width: 180" (4.57m)
Overall width: 190" (4.83m)
Overall length: 192" (4.88m)
Transport width: min 88" (2.24m)
Transport height: 88" (2.24m)
Weight, approx.: 5800 lbs (2636kg)
Minimum tractor HP: 70 HP (52kW)
Recommended tractor HP: 90 HP (67kW)
Cutting height: 1.5 to 19.25" (38 to 456mm)
Ground clearance: 17.5" (444mm) (with 24” tire)
Cutting capacity: 5" material (127mm) with brush blade
Safety Light Kit
540 RPM
CW Super Updraft 5" Blades
New 26" Laminate Tires
Pioneer Ends
Front Belting
Open Clevis

Financing and Leasing OAC!

Deliveries are available, ask your salesperson for details.

Prices are subject to applicable taxes.

Débroussailleuses rotatives à vendre au